H9MO-LMFE:SDH MSTP,Optical Transport Equipment,SDH MUX
SDH MSTP,Optical Transport Equipment,SDH multiplexer,
STM-1,STM-4 aggregate multiplexer
STM-1 SDH Multiplexer,ADM SDH Multiplexer,STM-4 SDH equipment,SDH/MSTP Optical Transport Equipment:H9MO-LMFE
Overview
H9MO-LMFE is a carrier-class, cost-effective, compact (only 1U high), STM-1/STM-4 SDH/MSPP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.
H9MO-LMFE is a card based compact SDH equipment, designed mainly as a gateway node between the core SDH network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network. The 1U high 19" wide chassis of the DHODT-LMFE has 8 slots, with 2 slots for the DC(1+1)/AC power supply, 1 slot for network management card, 1 slots for STM-1/STM-4 uplink, and 4 slots left for services (STM-1, Ethernet, E1, E3/DS3,V.35 Etc.).
Features
1. Support up to STM-4 rate SDH service
2. Support 1+1 MSP, SNCP protection
3. Ethernet service supporting GFP encapsulation, VC12 virtual concatenation (1~63 VC12) and LCAS
4. Management channel can be DCC bytes or E1 (VC12)
5. Inter-working with popular SDH/MSPP products of various vendors
6. Easy commissioning and maintenance
7. High integration, compact design
8. High reliability, low CAPEX and OPEX
Technical Specification
|
Index |
Performance Parameter |
||
|
SDH interface |
Max |
STM-1 |
10 |
|
STM-4 |
2 |
||
|
Connector |
SC/PC, SFP |
||
|
Spec. |
S-1.1, L-1.1, L-1.2, S4.1, L4.1 |
||
|
Service Card |
PWR01 |
DC-48V power card, 1+1 backup |
|
|
PWR02 |
AC220V power card |
||
|
NM02 |
EMS Management Card |
||
|
OX01 |
Dual STM-1 aggregation optical card |
||
|
EX01 |
Dual STM-1 aggregation electrical card |
||
|
OX04 |
Dual STM-4 aggregation optical card |
||
|
OS01 |
Dual STM-1 tributary optical card |
||
|
OS02A |
Ethernet +Dual STM-1 tributary optical card |
||
|
OS03 |
Ethernet +Single STM-1 tributary optical card |
||
|
EP01A |
24xE1 (120W, DB60) |
||
|
EP03 |
12xE1 (75W or 120W) |
||
|
EP03A |
12xE1 (120W, DB60) |
||
|
EP02 |
1xE3/DS3 |
||
|
FE01 |
4 FE over 4 VCG trunks (EoS) |
||
|
FE02 |
4 Fx over 4 VCG trunks (EoS), SFP |
||
|
FE04 |
4 FE over 1~16E1 (EoE) |
||
|
FE05 |
4 Fx over 1~16E1 (EoE), SFP |
||
|
FE06 |
Ethernet aggregation, EOS, aggregation ratio: 8:2, dual FE ports |
||
|
FE07 |
EOE, Ethernet aggregation, aggregation ratio: 8:2, dual FE ports |
||
|
GX01 |
EOS, Ethernet aggregation, aggregation ratio: 8:1, single GE port |
||
|
GX02 |
EOE, Ethernet aggregation, aggregation ratio: 8:1, single GE port |
||
|
ED01 |
2xV.35 Card(framed or unframed) |
||
|
DX02 |
Full 64E1 DS0 cross connection (2048x2048,64K) |
||
|
LA01 |
Order wire card |
||
|
PDH interface |
Max E1 |
96E1 |
|
|
Max E3/DS3 |
4 E3 |
||
|
Ethernet |
Interface speed |
10/100Base-Tx or 100Base-Tx, Comply with IEEE 802.3 |
|
|
Max FE Interface |
16FE(4FE/card) |
||
|
Encapsulation |
Comply with ITU-T G.7041 (VCAT, GFP, LCAS) |
||
|
V.35 |
Max Interface |
8V.35(2V.35/card) |
|
|
Cross-connect Capacity |
Uplink STM-1 |
16x16 VC4; 48x48VC3 |
|
|
Uplink STM-4 |
1008x1008VC12 |
||
|
NMS |
Interface |
10/100 Base-T (can be cascaded) |
|
|
EOW interface |
Standard socket RJ11 |
||
|
Physical Dimension(H/D/W) |
1U: 440 x 44 x 280 (mm) |
||
|
Power |
Supply |
-48V DC /220V AC |
|
|
Consumption |
<40W |
||
|
Environment |
Temperature |
0oC-50oC | |
|
Humidity |
<90 %(non-condensing) |
||
Typical Application
PDH Multiplexer
SDH Multiplexer
E1 Converter
TDM over IP
Modem
PCM Multiplexer
Fiber Media Converter
Fiber Video Converter
fiber module
SFP fiber module
SFP+ fiber module
40G 100G module
PCM multiplexer
fiber Module
SFP+ fiber module
40G module
100G transceiver
fiber to ethernet converter
E3 DS3 to ethernet converter
fiber optical modem
TDM over IP
G.SHDSL modem