Skype ID:cenny.xu


  • To Talk
  • cenny.xu-Click To Talk

IC-GL:E1 to Ethernet Converter

E1 to ethernet converter

ethernet over E1 converter

E1 protocol converter

More details

E1 to Ethernet Converter,ethernet over E1 converter:IC-GL

E1 to Ethernet Converter



IC-GL is a E1 to Ethernet converter that uses one E1 line to transmit Ethernet data from G.703 to Ethernet Bridge.

 E1 to Ethernet converter is expanding transmission distance and applicable range of Ethernet. It is developed with ASIC circuitry design technology. It is collocated with E1/G.703 as line interface. 

IC-GL has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform point-to-point integrity test. 


High-powered Ethernet bridge converter to expand Ethernet transmitting distance and using range.

Ethernet UTP interface has function of VLAN802.1Q. There have two transmitting mode to choose: data and image.

10/100 Base-T(UTP) LAN interface accords with IEE802.3/Ethernet work mode: full duplex/ half duplex physical interface: shielded RJ-45 across and direct connection optional

G.703 can be framed N*64Kbps(N=1-31) and unframed 2048Kbps which are named fractional and unfractional apartly. Under the framed mode, it sustains alternative CRC4 ON/OFF, CAS/CCS (30 & 31 time slot). Transmitting clock can be recovered from receiving signal in

G.703 lines and also can work in internal clock mode.

IC-GL satisfies requirements of G.703, G.704, G.706 of ITU.

IC-GL has local and remote loopback. Consumer can test lines and diagnose faults conveniently to perform integrality test point-to-point.

Many director LEDs on the front panel display work state and alarm signal of equipment.

G.703 line interface: impedance 120ohm(RJ45)/75ohm(BNC) optional

Having two kinds of machine model: standalone and rack mountable power supply: -48VDC or 220VAC optional

01.LAN Table:10000, automatic learning
02.Filtering and Forwarding:30000 frames/second
03.Buffer size:64M
04.Throughput Delay:1 frame
07.Work mode:Full duplex/ hale duplex
08.Data speed:10/100Mbps
09.Physical interface:10/100 Base-T(UTP)shield RJ45
10.Line transmission speed:N*64Kbps(N=1--31) 2048Kbps
11.Line coding options:HDB3
12.Format of line frame: G.703(framed/unframed)
13.Line interface:Impedance120ohm,RJ45;Impedance 75ohm, BNC
14.Transmission Features:According with G.703
15.Speed of data transmission:N*64Kbps(N=1--31)
16.Transmission mode:Synchronization
17.Clocking: Master clock,slave-clock,line clock
18.Testing mode:Local analogy loop back ;Remote digital loop back
19.Power supply:220VAC +/- 10% 50Hz;48VDC+/-10% 50Hz
20.Power consumption:5W
22.Temperature:0oC ~40oC


Typical Application

E1 ethernet converter

E1 interface converter

E3 to ethernet converter

E1 to Ethernet converter

4E1 to Ethernet converter

8E1 to Ethernet converter

T1 to ethernet converter

E1 to V.35 converter

E1 to V.35 ethernet converter

E1 to 4*V.35 converter

V.35 RS232 to ethernet converter

ethernet over E3

T3 to ethernet

DS3 to ethernet

E1 to ethernet converter



PDH Multiplexer
SDH Multiplexer
E1 Converter
TDM over IP
PCM Multiplexer
Fiber Media Converter
Fiber Video Converter
Fiber Module
SFP Fiber Module
SFP+ Fiber Module
40G 100G Module

PCM Multiplexer
Fiber Module
SFP+ Fiber Module
40G Module
100G Transceiver
Fiber to Ethernet Converter
E3 DS3 to Ethernet Converter
Fiber Optical Modem
TDM over IP






























Ultra Low Temperature Freezer
Speed Reducer
Rehabilitation Equipment
Telecom Equipment