The H9MO-LM63 comes in two versions. The standard H9MO-LM63 operates on a single power module, with a number of voltage options, while the dual power version, H9MO-LM63RP, provides both input power feed and internal power module redundancy for added operation reliability, but only supports -48V DC inputs. Both have a range of other options to suit application needs.
Ordering information for H9MO-LM63 and H9MO-LM63RP can be specified as:
H9MO-LM63/options and H9MO-LM63RP/options
where ‘options’ is a variable length string of option symbols.
Table 1.2-1 Options available to both H9MO-LM63 and H9MO-LM63RP:
SYM |
Option description |
Default |
Note |
P |
protection, two fiber ports provide STM-1 1+1 APS |
single fiber port |
|
F |
FC fiber connector |
SC connector |
Conflicts with option S |
S |
Single fiber duplex transmission |
Dual fiber |
Conflicts with option F |
L |
Long distance |
Normal distance |
|
5 |
1550nm transmission wavelength |
1310nm |
|
T |
120W E1 interface |
75W |
|
Table 1.2-2Options specific to H9MO-LM63:
SYM |
Option description |
Default |
Note |
8 |
-48V DC power supply |
100~240V AC |
Conflicts with other options |
4 |
+24V DC power supply |
|
Conflicts with other options |
E |
-48V DC / 100~240V AC selectable |
|
Switch selects either one of two power inputs, conflicts with options 8, 4 |
J |
Remote power outage detection |
No detection |
Conflicts with options 8, 4 |
Therefore, H9MO-LM63 without options indicate a device with a single STM-1 port, SC connector, dual fiber transmission, normal transmission distance, 1310nm transmission wavelength, 75W E1 ports, and 100~240V AC power supply.
To specify options other than the defaults, for example, STM-1 protection, -48V DC power supply, and 120W E1 interface, the ordering information should look like:
H9MO-LM63/8PT
Note that the position of each option symbol in the sequence is not significant.
Hi, this is a comment.
To delete a comment, just log in and view the post's comments. There you will have the option to edit or delete them.