IC-GV:E1 to V.35 V.24 X.21 Converter Supports Nx64K
E1 to V.35 Converter.
E1 to V.24 converter.
E1 to x.21 converter.
E1 to RS232 converter.
E1 to RS449 converter.
E1 to RS530 converter.
E1 to V.35 Converter.
E1 to V.24 converter.
E1 to x.21 converter.
E1 to RS232 converter.
E1 to RS449 converter.
E1 to RS530 converter.
E1 to V.35 V.24 X.21 Converter Supports Nx64K:IC-GV
Both Framed(N*64K) and Unframed(2048K),75/120ohm
Description
E1 to V.35/V.24/X.21 Converter Supports Nx64K
Introduce
Features
High-powered all-purpose unframed E1(2048kbps) and framed E1(N*64kps, N=1-31) to V.35 converter
To fully use bandwidth fractional E1 and sustain cascade and time division multiplex(TDM), time slot is set up by switches.
Data rata: synchronism N*64Kbps(N=1-31)-2048Kbps
Fully lucid signal conversed clock mode to sustain DTE and G.703 network clock
Convenient diagnosis function, test of analog loopback of local terminal and digital circular of remote terminal There are many director lights on the front panel to display work state and alarm signals of the equipment.
Lines are according with CCITT G.703, G.704, G.706, G.823. Lines code HDB3, under graded E1 mode, sustain CRC4ON / OFF, CAS / CCS optional
G.703 lines interface: impedance 120Ohm(RJ45) and 75Ohm(BNC) optional
2 kinds of machine model : standalone and rack-mountable.
Overview
IC-GV is an Asic-based converter using one E1/G.703 to convert to V.35. It can convert successive N*64K (N=1--32) data stream into PCM signal of E1. The data rate is up to 2048Kbps. Placed in E1 frame, data of user just need necessary timeslot. Setting timeslot is continuous and according with rate of data port. The data ports have V.35 and V.24/RS232C which are optional. The ports support external clock and become linking end line.
IC-GV satisfies the requirements of G.703, G.704&G.706 of ITU.
IC-GV has local and remote loopbacks. Therefore user can use circuity-test and malfunction diagnose conveniently.
Specifications
Rate of data tramission: |
N*64Kbps(N=1-31),2048Kbps |
Transmission mode: |
Synchronization; |
Line interface: |
Impedance 75ohm,physical |
|
interface BNC; |
|
Impedance 120ohm,physical |
|
interface RJ45 |
Transmission features: |
According with G.703; |
Clocking: |
LINE;EXTERNAL; |
Testing method: |
Local analogy loopback, |
|
Remote digital loopback; |
DCE interface: |
V.35 or V.24/RS232C; |
Power supply: |
220V +/- 10%,50Hz;48VDC(optional) |
Power Consumption: |
5W; |
Volume: |
245mm*215mm*50mm; |
|
9"L*5.8"W*1.6"H |
Temperature: |
0oC~40oC |
Humidity: |
0~95% |
Typical Application
V.35 RS232 to ethernet converter
PDH Multiplexer
SDH Multiplexer
E1 Converter
TDM over IP
Modem
PCM Multiplexer
Fiber Media Converter
Fiber Video Converter
Fiber Module
SFP Fiber Module
SFP+ Fiber Module
40G 100G Module
PCM Multiplexer
Fiber Module
SFP+ Fiber Module
40G Module
100G Transceiver
Fiber to Ethernet Converter
E3 DS3 to Ethernet Converter
Fiber Optical Modem
TDM over IP
G.SHDSL Modem
Ultra Low Temperature Freezer
Speed Reducer
Rehabilitation Equipment
Telecom Equipment