PCM-E16:16 Phone over E1 multiplexer,FXO/FXS E&M ETH PCM multiplexer
16 Phone over E1 multiplexer
FXO/FXS E&M ETH PCM multiplexer
16 Phone over E1 multiplexer
FXO/FXS E&M ETH PCM multiplexer
16 Phone over E1 multiplexer,FXO/FXS E&M ETH PCM multiplexer:PCM-E16
Introduce
PCM-E16 is point-to-point E1 multiplexing device developed based on special large scale integrated circuits. It has an alternative of 16 digital office phones and 1~4 serial data ports with perfect alarm functions, realizing SNMP management. The electric parts are all digital, high integration, low volume, convenient for maintenance. The device offers 16 channels voice+1 ETH, other functions are reserve.
Features
01.Based on the independent intellectual property rights of the integrated circuit;
02.Whole veneer design;
03.Can monitor the opposite alarm status;
04.E1 is conformed with G.703,adopts fully digital clock recovery and smooth phase lock technology;
05.Provide 2 extensional ports that can extend various data channels, such as asynchronous data (RS232/RS485/RS422/Manchester), switching value, E1, voice or 2/4-wire audio.
06.1~16 voices access and support call indication;
07.Audio ports support FXO and FXS,FXO connected with switches,FXS with users' phone;
08.Support SNMP management, and network management cascading (optional);
09.Can control local temperature and voltage;
10.Can monitor the opposite temperature and voltage,and set the threshold;
11.Power supply:AC220V、DC-48V;
12.More than 2~120km no relay transmission distance;
Technical Specification
E1 interface
Standard: conforms to G.703 standard.
Coding:HDB3
Interface rate:N×64Kbps, N:1~32
Impedance:75Ω (unbalance), 120Ω (balance)
Connector: BNC (75Ω), RJ45 (120Ω)
Jitter Performance: according to G.742 and G.823
Clock: internal clock, line clock.
10/100Base-T port
Rate:10M/100M,full/half duplex self adapt
Protocol:support IEEE 802.3,IEEE 802.1Q(VLAN)
MAC address table: 4096 MAC addresses
Ethernet Total Memory Sizes: 64MBits SDRAM
Physical interface:RJ45, support AUTO-MDIX(cross over and straight through self adapt)
FXS Telephone Port
Ring voltage: 75V
Ring frequency:25HZ
2 line input impedance:600Ω (hanging off)
Wastage: 40db
FXO Exchange Port
Ring detecting voltage:35V
Ring detecting frequency:17HZ-60HZ
2 line input impedance: 600Ω (hanging off)
Wastage:40db
2/4 wire E&M interface card
Channel quantity per card: 2
Standard referred to: ITU-TRECG.714
Transmit relative level: +3,0, -3dBr adjustable
Receive relative level: +3,0, +3dBr adjustable
Signaling mode: E&M
Interface impedance: 600Ω
Subscriber physical connector: RJ45
RS232 port
Rate:300-115.2Kbps auto-adaptable(Asynchronous)
Interface characteristic:Satisfies ITU-T V.24 standard
Connector:RJ45
Dimension
Standalone: 483(width)*252(depth)*44(height)mm
Working Condition
Input voltage:AC180V ~ 260V; DC-48V; DC+24V
Power consumption: ≤5W
Operating temperature:0°C ~ 50°C
Storing temperature:-40°C ~ +70°C
Relative humidity:95 %
Typical Application
PDH Multiplexer
SDH Multiplexer
E1 Converter
TDM over IP
Modem
PCM Multiplexer
Fiber Media Converter
Fiber Video Converter
Fiber Module
SFP Fiber Module
SFP+ Fiber Module
40G 100G Module
PCM Multiplexer
Fiber Module
SFP+ Fiber Module
40G Module
100G Transceiver
Fiber to Ethernet Converter
E3 DS3 to Ethernet Converter
Fiber Optical Modem
TDM over IP
G.SHDSL Modem
Ultra Low Temperature Freezer
Speed Reducer
Rehabilitation Equipment
Telecom Equipment