Telecom products

8 channel voice FXO/FXS E&M,E1 ethernet PCM multiplexer:PCM-F08

 

Function  

This point to point fiber transmitting equipment,which is designed on large scale integrated circuit,realizes 1-4E1 circuit,1 channel 10/100M Ethernet,1-8 channel voice phone and 1-4 channel RS232.Its merits include complete warning function,high integration,low consumption,stable performance and convenientusage.

For this device, we supply 2channels phones,4 channels 4wire E&M,1 channel E1,the other functions are invalid.

 

Features

1.provides 1-4channel E1/G.703;

2.provides 1 channel 100M (liner) Ethernet ports

3.provides 1-8 channel voice port,E&M 4wire;

4.provides 1-4 channel RS232,rates upports 300-115200 bps;

5.Ethernet port 10/100M,full/half duplex auto-adaptable and supports VLAN;

6.Ethernet ports upports AUTO-MDIX (twisted cable and straight cable auto-adaptable);

7. 1-8 channel voice connection,supports calling indication;

8.Configuration:point to point;

9.Optical interface supports SC/FC interface

 

Specification

 

Opticalinterface

Optical wave length: single mode 1310nm/1550nm

Fiber:single fiber or double fiber for option

Transmitting consumption:-9dBm/-5dBm

Transmission range:0-120Km for option Optical interface:SC/FC

Receiving and dispatching module:>-6dBm

Optical receiver receiving sensitivity:<-36dBm(BER<10^-11)

Fiber circuit code: NRZcode

FXS Telephone Port
Ring voltage: 75V
Ring frequency:25HZ
2 line input impedance:600Ω (hanging off)
Wastage: 40db

FXO Exchange Port
Ring detecting voltage:35V
Ring detecting frequency:17HZ-60HZ
2 line input impedance: 600Ω (hanging off)
Wastage:40db

2/4 wire E&M interface card  
Channel quantity per card: 2 
Standard referred to: ITU-TRECG.714
Transmit relative level: +3,0, -3dBr adjustable
Receive relative level: +3,0, +3dBr adjustable
Signaling mode: E&M
Interface impedance: 600Ω
Subscriber physical connector: RJ45

E1 interface  

Standard:conforms to G.703 standard Line

Speed:2.048MHz±50PPM

Code：HDB3

Impedance:75Ω（unbalanced

Connector:BNC（75Ω

Vibration characteristic:satisfies G.742 and G.823 standard

10/100Base-Tport  

Rate：10M/100M，full/half duplex auto-adaptable

Protocol:supportsIEEE802.3,IEEE802.1Q(VLAN)

MAC address: can learn 4096 MAC address

Physical interface:RJ45,supports AUTO-MDIX(twisted cable and straight cable auto-adaptable)

RS232port  

Rate：300-115.2Kbps auto-adaptable (Asynchronous)

Interface characteristic:SatisfiesITU-TV.24standard

Connector：RJ45

Physical Dimension

Desktop:483(width)*138(depth)*44(height)mm

Operation Condition  

Voltage：AC180V~260V;DC–48V;DC+24V

consumption:≤5W

Operating temperature:0°C~50°C

Storing temperature：-40°C~+70°C

Relative humidity::95%

 

Typical Application

 

 

 

 

 

PDH Multiplexer
SDH Multiplexer
E1 Converter
TDM over IP
Modem
PCM Multiplexer
Fiber Media Converter
Fiber Video Converter
Fiber Module
SFP Fiber Module
SFP+ Fiber Module
40G 100G Module

PCM Multiplexer
Fiber Module
SFP+ Fiber Module
40G Module
100G Transceiver
Fiber to Ethernet Converter
E3 DS3 to Ethernet Converter
Fiber Optical Modem
TDM over IP
G.SHDSL Modem

 

 

 

 

 

 

 

 

 

 

 

 

 

Ultra Low Temperature Freezer
Speed Reducer
Rehabilitation Equipment
Telecom Equipment