H9MO-LMFIT:SDH multiplexer,STM-1 equipment,E1 V.35 ethernet SDH multiplexer
SDH multiplexer,
ADM SDH optical transmission equipment,
STM-1 to E1 v.35
SDH multiplexer,
ADM SDH optical transmission equipment,
STM-1 to E1 v.35
SDH Mutiplexer MSPP STM-1 fiber optic equipment:H9MO-LMFIT
Description
SDH/MSPP STM-1 Multiplexer
Overview
As a key member of FastCOM "MetroEdge-Express"SDH/MSPP Product family, H9MO-LMFIT is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform that is designed for applications in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.
H9MO-LMFIT is a modularized unit with 4 universal slots, supporting different interface cards, such as STM-1 fiber optic cards, E1 cards, Ethernet cards (EoS VCAT), and V.35 card. The main board cross-connect capacity is 504*504 VC-12s (8*8 VC-4s), allowing non-blocking adding/dropping services among different interfaces. It supports the hybrid transmission of SDH, PDH, Ethernet and N*64K V.35 services within the same equipment. With the large capacity cross-connect matrix, the H9MO-LMFIT can be configured as ADM, TM, and REG. It is suitable for multiple network topologies such as point-to-point, chain, ring, hub, and mesh networks.
Features
1. 4 General Slots, supporting a range of interface cards, including SDH, PDH, Ethernet and V.35 cards.
2. Ethernet service supporting GFP encapsulation, VC12 virtual concatenation (1~63 VC12)
3. Large cross-connect matrix capacity is 504*504 VC-12s (8*8 VC-4s) and powerful networking ability
4. LCD display for system configuration and alarm
5. Inter-working with popular SDH/MSPP products of various vendors
6. Suitable for 3G access network transmission
7. Easy commissioning and maintenance
8. High integration, compact design
9. High reliability, low CAPEX and OPEX
Index
|
Performance Parameter
|
|
SDH Interface
|
Max
|
8 STM-1 optical interfaces(Four F155-DO cards used)
|
Connector
|
SC/PC
|
|
Spec.
|
S-1.1, L-1.1, L-1.2
|
|
Single fiber bi-directional interface can be optionally supported
|
||
Service Card
(4 General Slots)
|
F155-O
|
Single STM-1 optical interface card
|
F155-DO
|
Dual STM-1 optical interfaces card
|
|
F4XE1
|
4*E1 interface card (75W)
|
|
F8XE1
|
8*E1 interface card (75W or 120W)
|
|
FFE201
|
2*FE interface card (2 FEs over a single virtual concatenation channel)
|
|
FFE404
|
4*FE interface card (4 FE interface over 4 independent virtual concatenation channels)
|
|
F2XV35
|
2*V.35 framed interface card (Nx64k)
|
|
PDH interface
|
E1 Spec.
|
Comply with G.703, 2.048Mbps, HDB3
|
Max E1
|
24E1 (three F8XE1 cards support)
|
|
Ethernet
|
Interface
|
10/100Base-Tx, Comply with IEEE 802.3
|
Max FE Interface
|
12 FE (three FFE404 cards support)
|
|
Encapsulation
|
Comply with ITU-T G.7041 (GFP)
|
|
V.35
|
Max Interface
|
6 V.35 interfaces (n*64K)
DCE/DTE
|
Cross-connect Capacity
|
Low order VC12
|
504*504 VC12
|
Management
|
Protocol
|
SNMP or Q3
|
Interface
|
10Base-T and RS232
RS485
|
|
EOW interface
|
Standard socket RJ11
|
|
LCD Display
|
Supported
|
|
Physical Dimension
|
1U: 440 * 44 *230 (mm)
|
|
Power
|
Supply
|
-48V DC or 220V AC or dual power supply
+24VDC
|
Consumption
|
Consumption <15 w
|
|
Environment
|
Temperature
|
5oC-45oC
|
Humidity
|
<90%
|
|
Weight
|
<3.5kg
|
PDH Multiplexer
SDH Multiplexer
E1 Converter
TDM over IP
Modem
PCM Multiplexer
Fiber Media Converter
Fiber Video Converter
Fiber Module
SFP Fiber Module
SFP+ Fiber Module
40G 100G Module
PCM Multiplexer
Fiber Module
SFP+ Fiber Module
40G Module
100G Transceiver
Fiber to Ethernet Converter
E3 DS3 to Ethernet Converter
Fiber Optical Modem
TDM over IP
G.SHDSL Modem
Ultra Low Temperature Freezer
Speed Reducer
Rehabilitation Equipment
Telecom Equipment